- [Korean]
- Effect of Sintering Temperature on the Microstructure and Mechanical Properties of Solid Oxide Fuel Cell Anode Fabricated by Spark Plasma Sintering
-
Byung Ju Song, Ka Ram Kim, Hye Sung Kim
-
J Korean Powder Metall Inst. 2013;20(6):425-431.
-
DOI: https://doi.org/10.4150/KPMI.2013.20.6.425
-
-
913
View
-
3
Download
-
1
Citations
-
Abstract
PDF
- Microstructural and mechanical properties of Ni-YSZ fabricated using SPS processing have been investigated at various sintering temperatures. Our study shows samples to be applied as a SOFC anode have the proper porosity of 40% and high hardness when processed at 1100°C. These results are comparable to the values obtained at 100-200°C higher sintering temperature reported by others. This result is important because when the fabrication processes are performed above 1100°C, the mechanical property starts to decrease drastically. This is caused by the fast grain coarsening at the higher temperature, which initiates a mismatch between thermal expansion coefficients of Ni and YSZ and induces cracks as well.
-
Citations
Citations to this article as recorded by 
- Advanced sintering techniques for electrochemical and catalytic applications. Part 1: Radiation-thermal, spark plasma, flash, and microwave sintering
Nikita Eremeev, Yulia Bespalko, Vasiliy Bolotov, Mikhail Mikhailenko, Mikhail Korobeynikov, Alexander Bryazgin, Dina Dudina, Kirill Rybakov, Vladislav Sadykov Chimica Techno Acta.2026;[Epub] CrossRef
|